Skorpion 250 R/90

250 r90 sr 03

Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side.

This chipper is mounted on a single-axial chassis, adapted to tow it in the forest and field roads. There is also a version with a three-point system of linkage to the tractor (without single-axial chassis). 

The chipper is designed to work with an over 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 1000 revolutions per minute.

The essential equipment of the chipper includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump. There is also a possibility of equipping the chipper with a unit for receiving the hydraulics from the tractor. Standard models also have a lever system of the hydraulic divider that can change the direction of the feeding rollers. 

The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding. 

Chips made by Skorpion 250 R/90 can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks, etc., and after additional disintegrating in a mill for production of pellets and briquettes. 

Technical details

MODEL

SKORPION 250 R/90

Overall dimensions (length x width x height) [mm]

2830 x 2400 x 2730 (≈4000)
1805 x 2100 x 2730 (≈4000)

Weight [kg]

1450
1100

Branch diameter [mm]

250

No of knives

2 or 3 cutting + 2 counter-knife

Feeding speed [running meters/min]

up to 42

Chipping capacity [stère meters/h]

up to 18

Chip width [mm]

from 9 to 14

Feeding unit

hydraulic feeder

Disk diameter [mm]

800

Hopper dimensions (width x height) [mm]

 420 x 255

Type of drive

tractor’s PTO

Min. power of tractor [hp]

80

() - dimension after the pipe is raised, during operation

Equipment included:

  • PTO shaft
  • Independent hydraulic system
  • Adjustment of height of ejecting the chips
  • Rotary chimney 360°
  • No-stress system
WebGarden